Hettich Cabinet Hardware: How to Read Hettich Article Numbers and Find Your System

Our Hettich product titles carry a number right after the brand name, such as 9071223. This guide shows where Hettich prints its numbers, what Hettich's description tells you, and which Hettich system each group of our parts belongs to.

What a Hettich article number is

Hettich's Sensys, Optimat and Quadro brochures list the number in ordering tables, for example under "Order no." next to a PU column with Hettich's pack, such as 50 ea. or 200 ea. These brochures print seven-digit numbers with spaces: 9 071 223 in the Sensys brochure is 9071223 on our site. Some of our Hettich pages carry five-digit numbers, such as 10067 and 50121.

The Hettich documents we read give no key to the digits: treat the number as an order number and read the model from the description. The PU is Hettich's pack, not the quantity of our listing; if a product page leaves the quantity unclear, ask us.

Hettich's description carries the model

Examples from Hettich's US Sensys and Optimat brochures and its AvanTech YOU Illumination flyer:

What Hettich's tables show:

• In the Sensys tables for 110 degree, thick door, thin door and wide angle hinges, models with i (8645i, 8631i, 8646i, 8657i) are listed "With integrated Silent System" and the same models without i "Without Silent System"; the brochure states no rule.
• One version can have more than one number: the full overlay Sensys 8645i hinge for screwing on is 9 073 617 in the 50 ea. column and 9 071 223 in the 200 ea. column.
• Hand and pack can change the number: Hettich's Quadro brochure lists the Quadro V6 9" runner with Silent System as 9 304 255 (left) and 9 304 256 (right) in bulk packs, and 9 304 257 as a pair.
• Numbers can be replaced: Hettich's AvanTech YOU conversion list pairs OLD and NEW catalogue codes, for example 9255246 and 9318619 for a silver drawer side profile set, height 101 mm, nominal length 350 mm.

If your number does not match ours, compare the descriptions or send it to us rather than order the nearest match.

Find your Hettich system

Separate guides cover Hettich hinges, Hettich drawers and Grant and SlideLine M in detail.

Sensys hinges and mounting plates

Hettich calls Sensys "the hinge with integrated Silent System". Its brochure lists the hinge types above and cross mounting plates "For Sensys and Intermat"; our 0 mm screw-on plate 9071575 appears there under distance D 0.0 mm. The same brochure lists the Intermat 9930 "Hinge for corner cabinet folding doors", opening angle 50 / 65 degrees, which our titles call 50/65 BiFold (9090116). Examples: Sensys 8645i hinge 9071223, 0 mm mounting plate 9071575.

Optimat and Selekta Pro 2000

Hettich's Optimat brochure (PDF) calls Optimat "Hinge technology for face frame cabinetry" and "a two piece compact hinge with integrated silent system that comes in 4 overlays and 6 adjustments". Example: Optimat 3/4" overlay hinge 929476400. Selekta Pro 2000 is a Hettich single pivot hinge with "an opening angle of up to 270 degrees", described as "the preferred choice on the international stage for office furniture"; our Pro 2000 titles, such as the cover cap 10067, belong to it.

AvanTech YOU drawers, Quadro and Actro runners

AvanTech YOU is a Hettich drawer system; Hettich's Actro 5D page says that "AvanTech YOU drawer system can be used on both runner systems", Actro YOU and Quadro YOU. For wooden drawers, the Quadro page places the Quadro 25 2D partial-extension runner at the economical entry, then the Quadro V6 5D full-extension runner, and the Actro 5D full-extension runner for the premium segment. Examples: AvanTech YOU set 9353039 and Quadro V6 9" runner 9304255K.

Grant sliding and folding door hardware

Hettich presents Grant as "a wide range of residential and commercial grade folding and sliding door hardware systems": TopLine Grant SD/HD/XHD, the TopLine Grant 6000, 7000, 1200 and 5000 series, the Grant E-series, the Bi-Fold Series and the WingLine Grant 1200 Series. Our Grant items include tracks, hardware sets and running components, such as the 4 ft single track 50121.

SlideLine M

SlideLine M is a Hettich sliding door system for "Living room storage units and shelf systems, kitchen wall units as well as bathroom furniture and office cabinets", with "Silent System damping in opening, closing and collision direction". Example: SlideLine M fitting set 9156338.

How our titles shorten Hettich's terms

88lb and 154lb in our AvanTech YOU titles equal 40 kg and 70 kg, rounded: Hettich's conversion list prints "Load class L (40 kg)" and "Load class XL (70 kg)" for the Actro YOU runner used with AvanTech YOU. For colors, use Hettich's names: silver, white and anthracite in the conversion list, Anthracite and Stainless Look in the Illumination flyer. Gray in our AvanTech YOU titles is our word, not one of these names.

Numbers that are ours, not Hettich's

Numbers ending in K, such as 9304255K, and nine-digit numbers, such as 929476400, are our catalog numbers. The Quadro brochure prints no K: for the Quadro V6 9" runner it lists 9 304 255 (left), 9 304 256 (right) and 9 304 257 (pair), while our 9304255K is titled LH/RH, so compare hand and pack, not only digits. The Optimat brochure lists the screw-on Optimat hinges for 3/4" and 1/2" overlay as 9 294 764 and 9 294 765, shown on our site as 929476400 and 929476500. For others, send us the number from your part or box.

Hettich at The Builders Supply

• Hettich brand page - 224 products (October 12, 2026)
• Categories: Cabinet Hinges, Drawer Slides and Drawer Systems, Sliding and Folding Cabinet Door Hardware
• General terms, explained in our Hafele guides: concealed hinges, overlay, inset and mounting plates; drawer runners

If you are not sure which system your part belongs to, send us the number and a photo. Our customer support team is available Monday - Friday, 8 AM - 4 PM Central Time, at 1-888-800-7789 or [email protected].