Major HIT-22 Mortise Cylinder Drill Guide

Major Mfg Co Inc HIT-22 Mortise Cylinder Drill Guide revolutionizes the installation of mortise cylinders, ensuring precision and reliability with every use. Gone are the days of uncertain placements; this innovative tool guarantees your cylinder will be perfectly positioned every time. To begin, simply mark the desired location for the cylinder on the door and drill a 1/2" hole. Insert the HIT-22 into the lock as you would with a standard mortise cylinder, tighten the mounting screw, and proceed to install the lock in the door. The guide remains visible through the 1/2" hole, allowing for straightforward operation. With a 1-1/4" hole saw, insert the pilot into the guide and drill the cylinder hole, resulting in a flawless installation or the ability to easily redrill if necessary. The HIT-22 comes complete with a drill guide, hole saw pilot, and an extractor handle, making it an essential addition to any locksmith's toolkit. Whether you're a building professional or a knowledgeable homeowner tackling a DIY project, this tool will enhance your efficiency and accuracy. Trust Major Mfg Co Inc to provide the high-quality equipment you need for successful mortise cylinder installations.

Mortise Cylinder Drill Guide

• Until now, installing a mortise cylinder in the proper location was a hit or miss proposition.
• With our HIT-22 it will always be in the right spot.
• Simply mark where the cylinder should go on the door and drill a 1/2" hole.
• Place the HIT-22 in the lock like a mortise cylinder, tighten the mounting screw and install the lock in the door.
• You will see the guide thru the 1/2" hole in the door.
• Using a 1-1/4" hole saw, insert the hole saw pilot in the guide and drill the cylinder hole.
• You will have a perfect installation or redrill every time.
• The HIT-22 includes drill guide, hole saw pilot and extractor handle.

Features

• Place the HIT-22 in the lock like a mortise cylinder, tighten the mounting screw and install the lock in the door.
• The HIT-22 includes drill guide, hole saw pilot and extractor handle.
• Simply mark where the cylinder should go on the door and drill a 1/2" hole.
• Until now, installing a mortise cylinder in the proper location was a hit or miss proposition.
• You will have a perfect installation or redrill every time.
• Using a 1-1/4" hole saw, insert the hole saw pilot in the guide and drill the cylinder hole.
• You will see the guide thru the 1/2" hole in the door.
• With our HIT-22 it will always be in the right spot.