NGP 110NDKB 60" DKB-finish Aluminum Neoprene Sponge Seal provides a robust solution for enhancing the performance and durability of your commercial restroom partitions. Constructed from high-quality Aluminum Alloy 6063 with a T5 temper, this seal is designed to withstand demanding conditions while offering excellent abrasion resistance and tensile strength. The innovative synthetic EPDM rubber encapsulated in a polypropylene thermoplastic matrix creates a closed cell advanced elastomeric foam that is both flame-resistant and moisture-resistant, ensuring longevity and reliability. With a temperature range of -81°F to 275°F, the NGP seal performs exceptionally well in various environmental conditions. This product is BHMA certified to ANSI/BHMA A156.22 performance tests for heat and cold, providing peace of mind regarding its quality and effectiveness. The seal is finished in a sleek dark bronze color, seamlessly integrating with your existing decor. It comes equipped with #6 x 3/4" stainless steel sheet metal screws for easy installation, and the slotted screw holes allow for adjustments during setup. With good resistance to ozone, sunlight, and aging, the NGP 110NDKB seal is an excellent choice for building professionals and homeowners who prioritize durability and performance in restroom partition hardware.
60" DKB-finish Aluminum Neoprene Sponge Seal
BHMA: BHMA Certified to ANSI/BHMA A156.22 Performance Tests for Heat and Cold
Color: Color is Black
Fasteners: #6 x 3/4" Stainless Steel Sheet Metal Screws Furnished
Finish: Dark Bronze Finish
Fire Rated: Flame-Resistant
Length: 60.0"
Material: Aluminum Alloy 6063, T5 Temper
Moisture Resistant: YES
Patented: Patent Pending Microcellular EPDM
Resistance: Good Resistance to Ozone, Sunlight and Aging
Standard-0: CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B, complies with NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
Standard-1: POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C, complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes.
Standard-2: AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
Standard-3: SMOKE & DRAFT CONTROL GASKETING. Certified by UL to ANSI/UL10C and ANSI/UL1784 Category ‘H’; complies with IBC and NFPA 105 for use on ‘S’ labeled Positive Pressure Hollow Metal fire doors rated up to 3 hours, and Wood fire doors rated up to 90 minutes.
Standard-4: ANSI/BHMA CERTIFIED. Certified Gasketing complies with American National Standard for Door Gasketing and Edge Sealing Systems ANSI/BHMA A156.22 and is listed in the BHMA Certified Products Directory.
Temperature Range: Temperature Range -81°F to 275°F
