NGP 9275 Steel Strike Shim

NGP 9275 Steel Strike Shim is designed to accommodate 4-7/8" ‘ASA’ strike plates, providing a reliable solution for excessive door and frame clearances of up to 5/16". This shim is UL Certified as a miscellaneous fire door accessory, ensuring compliance with fire safety standards. It is rated for use on 90-minute UL10B and UL10C wood or hollow metal fire doors, making it an essential component for any commercial restroom installation. For optimal performance, the NGP 9275 should be used in conjunction with other NGP products such as the NGP 9400 Intumescent Seal, 9945 Steel Stop Extender, and 5075 Self-Adhesive Seal, particularly where excessive clearances occur at jambs and heads on 90-minute fire doors. This combination helps maintain the integrity and safety of fire-rated door assemblies. With a sleek gray finish, the NGP 9275 not only meets stringent safety requirements but also offers a professional appearance suitable for any commercial environment. Certified for use in both the US and Canada, this shim is a versatile and vital addition to your restroom partition hardware collection, ensuring that your installations are compliant and secure.

Steel Strike Shim

• 90-Minute Rated UL10B and UL10C Wood or Hollow Metal Fire Doors
• Finish: Gray
• Certified for use in US and Canada
• NGP 9400 Intumescent Seal, 9945 Steel Stop Extender, 5075 Self-Adhesive Seal Excessive Clearance Solutions Are Also Required Where Excessive Clearance Occurs at Jambs and Head on 90-Minute Fire Doors
• NGP 9200 Intumescent Seal Excessive Clearance Solution is also Required Where Excessive Clearance Occurs at Jambs and Head on 20-Minute Fire Doors
• Fits 4-7/8" ‘ASA’ Strike Plate
• UL Certified Miscellaneous Fire Door Accessory for Excessive Door and Frame Clearances, Measuring up to 5/16"
• NGP GAP90 or GAP90N Excessive Clearance Solutions Are Also Required Where Excessive Clearance Occurs at Jambs and Head on 60- and 90-Minute Fire Doors
• UL Certified Solution for 60- and 90-Minute Fire Doors with Excessive Clearance Between Door and Frame Over 1/8", up to 3/8"
• Required for Proper Latch-bolt Engagement
• UL Certified Solution for 20- and 45-Minute Fire Doors with Excessive Clearance Between Door and Frame Over 1/8", up to 9/16"
• NGP 9200 Intumescent Seal Excessive Clearance Solution is also Required Where Excessive Clearance Occurs at Jambs and Head on 20- and 45-Minute Fire Doors
• Certified for Use in US and Canada

Resources

• ADA Compliant Ramps
• Anodized vs. Mill Finish
• BHMA Standards
• Buy American
• Edge Sealing Systems for Positive Pressure Fire Door Assemblies
• Finger Guard 2248
• Gap Explained Sheet
• Gap Explained Sheet
• Hinge Side Finger Guard 2252
• IBC Code Revision to Fire Rated Glass in Doors
• Leed
• NGP Sustainability Report
• Returned Closed Ends for Thresholds & Ramps
• The Bad Boy Thresholds
• Warranty