Norton 7124SZ LH 24V 689 7100SZ Safe Zone Series

Norton 7124SZ LH 24V 689 7100SZ Series Safe Zone is a cutting-edge door closer designed to enhance safety in high-traffic environments. This regular arm, push-side closer is specifically engineered for left-handed doors and operates on a 24V system, all while featuring a sleek aluminum painted finish. Equipped with a multi-point, electromechanical closer and a programmable motion sensor, the SafeZone ensures that the door does not close when movement is detected in the threshold. This innovative feature safeguards individuals such as wheelchair users, the elderly, and children, allowing them to pass through without risk. Once movement ceases, the door will close after a customizable timeout period. The unit boasts a maximum opening angle of 180 degrees, and its fail-safe design guarantees closure during power interruptions. With adjustable backcheck cushioning and independent regulation of sweep and latching speeds, this closer adapts to various environments, making it ideal for theaters, hospitals, and schools. Installation is flexible, supporting surface or soffit mounting, and it accommodates doors ranging from 28" to 44" in width. The Norton 7124SZ is a reliable choice for commercial applications, providing both functionality and peace of mind. With a limited two-year warranty, you can trust in its durability and performance.

7100SZ Series Safe Zone

Regular Arm, Push Side SafeZone Door Closer, Size 4, Left Hand, 24V, Aluminum Painted

Designed with safety in mind, SafeZone takes door closers to a higher level. The handed SafeZone uses a multi-point, electromechanical closer and a programmable motion sensor. When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing. A physically disabled person in a wheelchair; an elderly person moving slowly; a child who stops to pick up a toy are all protected. When movement is no longer detected, the adjustable setting times out and the door closes. The hold open time and sensitivity are selectable. SafeZone detects movement in both directions, allowing one person or a stream of people to travel through an opening, making it ideal for theaters, hospitals, doctor's offices and elementary schools.

Designed with safety in mind, SafeZone® takes door closers to the next level.

SafeZone uses a multi-point, electromechanical closer and a programmable motion sensor. When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing. When movement is no longer detected, the adjustable setting times out and the door closes.

• Electromechanical closer units to be a multi-point, closer/holder type with selective hold open positioning achieved by electronic solenoid locking of closer arm slide into the track assembly. Closer/holder units to have a maximum opening of 180° (hold open to 175°) and are fail safe to close the door in the event of electrical power interruption.
• SafeZone Detection: Closer/holders units to have an integral sensor device monitoring a "zone of safety" at the door opening. SafeZone detection prevents the door from closing in the event of movement within the adjustable sensing field. Movement is detectable in both directions with selectable closer hold open time and sensor sensitivity. Mechanical closer to be hydraulic type with full rack and pinion construction enclosed in a cast aluminum alloy shell. Internal hydraulic fluid is to be non-gumming and non-freezing. Include two non-critical valves to independently regulate sweep and latching speeds and an adjustable backcheck cushioning valve. All valves are adjustable by hex key. Provide spring power adjustment permitting a 50% increase in closing power over the minimum closing force for any closer size. 
• Mounting: Closer units can be surface mounted to the frame face for application on the pull (hinge side) side of door, or soffit mounted on the push side of the door frame with projection of no more than 2-5/8" (67mm) from the frame face. Frame face must be a minimum 2" and ceiling clearance a minimum of 4". Door must be hung on either butt hinges or 3/4" offset pivot hinges, minimum 1-3/4" to 2-1/4" thickness.
• Installation: Provide optional handheld remote device for programming SafeZone sensor settings. Auxiliary door stops are recommended at closer/holder openings and required at doors opening beyond 110°. Interior installation only. 
• Power: Closer units operate on (120VAC, 60Hz) or (24VDC) with an amperage draw not exceeding (.086 Amps for 24VAC/DC) (.051 Amps for 120VAC). Supplier to coordinate electrical requirements with electrical and alarm system engineers. Field wiring (and conduit) by others.

Resources

• 7100REM Remote Programming Guide
• 7100SZ 120V with Fire Alarm Contacts
• 7100SZ 12V
• 7100SZ 24V
• 7100SZ 24V with Fire Alarm Contacts
• 7100SZ SafeZone
• 7100SZ Series Door Closer - Environment Product Declaration (EPD)
• 7100SZ Series Safe Zone Cut Sheet
• 7100SZ Series SafeZone Installation and Instruction Manual
• 7100SZ Series SafeZone with External Sensor Installation and Instruction Manual
• 7100SZ Series SafeZone with Selective Hold Open Installation Manual
• SafeZone Education Sell Sheet
• SafeZone Healthcare Sell Sheet
• SafeZone Overview Video
• Selective Hold Open Standard for SafeZone