Norton 7213MPSO LH 24VDC 689 Electromech Closer Holder

Norton 7213MPSO LH 24VDC 689 Electromechanical Closer/Holder offers a robust solution for door control in commercial settings. This electromechanical closer serves as a slave or support unit, featuring a selective hold open mechanism that allows the door to remain open at any angle up to 180 degrees. Its Size 3 configuration, combined with a rigid slide arm and track, ensures reliable performance with a sleek aluminum finish. Designed for easy installation, this unit can be surface-mounted on either the push or pull side of the door. The hydraulic, full rack and pinion type closer is crafted with a cast aluminum alloy shell, ensuring durability and longevity. It incorporates two independent valves that allow for precise regulation of both closing and latch speeds, as well as an adjustable backcheck for added safety. In the event of an electrical power interruption, the Norton 7213MPSO is fail-safe, ensuring the door closes automatically. Optional integral smoke detectors and remote wireless door releases enhance its functionality, making it a versatile choice for a variety of applications. With its matte silver finish and dependable operation, this closer/holder is designed to meet the needs of both installers and facility managers, ensuring a secure and accessible environment.

Electromech. Closer/Holder

Electromechanical Closer, Slave/Support Unit, Selective Hold Open, Size 3, Rigid Slide Arm & Track, LH, 24VDC, Aluminum

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers. Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180¡. Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers.

Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180°.  Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.  

• Units shall be surface mounted to the frame face [on the pull (hinge side) on the push (opposite hinge side)] of the door [and shall project no more than 2-5/8" (67mm) from the surface of the frame].
• (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail).
• Closer unit shall be hydraulic, full rack and pinion type with a cast aluminum alloy shell. 
• Hydraulic fluid shall be non-gumming and non-freezing.
• Closer unit shall have two non-critical valves to independently regulate closing and latch speed.
• It shall also have an adjustable backcheck with a hex-key.
• Closer unit shall have spring power adjustment to permit a 50% increase in closing power over the minimum closing force for any size.
• Electromechanical Closer shall have (Infinite) (Selective) Hold Open (Free Swing Operation) and shall be able to attain a maximum opening of 180° (with hold open to 175°).
• Unit to be fail safe and must close the door during any electrical power interruption to the unit. 
• (Closer/Holder to be Executive Door Holder/Release with release actuated by battery operated hand-held controller).

Resources

• 7200 Electromechanical Closer
• 7200 Series Door Closer - Environmental Product Declaration (EPD)
• 7200 Series Electromechanical Closers Cut Sheet
• 7210, 7250 (Pull Side), 7220, 7230 (Push Side) Instruction Manual
• 7290MPI, 7290 MPS Overhead Concealed Closer/Holder
• 7290MPI, 7290MPS x 790 Fire Block Overhead Concealed Closer/Holder
• Master (MPDO), Slave/Support (MPSO) Units (7200 Series)
• Master (PTDO) or Support (PTO) Units, Push or Pull Side