Norton 7214MPSO LH 24VDC 689 Electromech Closer Holder

Norton 7214MPSO LH 24VDC 689 Electromech. Closer/Holder is a state-of-the-art electromechanical closer designed for flexibility and efficiency in both commercial and residential settings. This surface-mounted unit operates as a slave/support mechanism with a selective hold open feature, allowing doors to remain open at any angle up to 180 degrees, while also ensuring a smooth closing action. Manufactured with a robust cast aluminum alloy shell, the 7214MPSO is equipped with a hydraulic, full rack and pinion system. It includes two non-critical valves that independently regulate closing and latch speeds, along with an adjustable backcheck for enhanced control. The closer’s spring power adjustment allows for a 50% increase in closing power, meeting the demands of various door sizes. This model is designed for fail-safe operation, automatically closing the door during any electrical power interruption. Additionally, it can be customized with integral smoke detectors or remote wireless door releases, enhancing safety and convenience. Finished in a matte silver (689/US28), the Norton 7214MPSO is not only functional but also aesthetically pleasing, making it an ideal choice for modern architectural designs.

Electromech. Closer/Holder

Electromechanical Closer, Slave/Support Unit, Selective Hold Open, Size 4, Rigid Slide Arm & Track, LH, 24VDC, Aluminum

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers. Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180¡. Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers.

Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180°.  Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.  

• Units shall be surface mounted to the frame face [on the pull (hinge side) on the push (opposite hinge side)] of the door [and shall project no more than 2-5/8" (67mm) from the surface of the frame].
• (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail).
• Closer unit shall be hydraulic, full rack and pinion type with a cast aluminum alloy shell. 
• Hydraulic fluid shall be non-gumming and non-freezing.
• Closer unit shall have two non-critical valves to independently regulate closing and latch speed.
• It shall also have an adjustable backcheck with a hex-key.
• Closer unit shall have spring power adjustment to permit a 50% increase in closing power over the minimum closing force for any size.
• Electromechanical Closer shall have (Infinite) (Selective) Hold Open (Free Swing Operation) and shall be able to attain a maximum opening of 180° (with hold open to 175°).
• Unit to be fail safe and must close the door during any electrical power interruption to the unit. 
• (Closer/Holder to be Executive Door Holder/Release with release actuated by battery operated hand-held controller).

Resources

• 7200 Electromechanical Closer
• 7200 Series Door Closer - Environmental Product Declaration (EPD)
• 7200 Series Electromechanical Closers Cut Sheet
• 7210, 7250 (Pull Side), 7220, 7230 (Push Side) Instruction Manual
• 7290MPI, 7290 MPS Overhead Concealed Closer/Holder
• 7290MPI, 7290MPS x 790 Fire Block Overhead Concealed Closer/Holder
• Master (MPDO), Slave/Support (MPSO) Units (7200 Series)
• Master (PTDO) or Support (PTO) Units, Push or Pull Side