Norton 7215MPSO RH 24VDC 689 Electromech Closer Holder Instruction Manual

Norton 7215MPSO RH 24VDC 689 Electromechanical Closer/Holder combines functionality and reliability for a seamless door control experience. This electromechanical closer serves as a slave/support unit, expertly engineered to facilitate selective hold open at any angle up to 180°. With a robust Size 5 design, it features a rigid slide arm and track, ensuring durability and stability in commercial environments. Designed for either push or pull side mounting, the Norton 7215MPSO is easy to install and offers flexibility for various applications. Its hydraulic full rack and pinion mechanism features non-gumming, non-freezing hydraulic fluid, along with dual valves for independent regulation of closing and latch speeds. The adjustable backcheck, activated with a hex-key, provides further customization to meet specific needs. This closer/holder is fail-safe, guaranteeing that the door will close in the event of a power interruption, ensuring safety and compliance. Additionally, it can be integrated with optional smoke detectors and remote wireless door releases, enhancing its functionality. Finished in a sleek matte silver (689/US28), this unit seamlessly blends with any commercial decor, making it a smart choice for facility managers looking for both aesthetics and performance.

Electromech. Closer/Holder

Electromechanical Closer, Slave/Support Unit, Selective Hold Open, Size 5, Rigid Slide Arm & Track, RH, 24VDC, Aluminum

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers. Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180¡. Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers.

Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180°.  Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.  

• Units shall be surface mounted to the frame face [on the pull (hinge side) on the push (opposite hinge side)] of the door [and shall project no more than 2-5/8" (67mm) from the surface of the frame].
• (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail).
• Closer unit shall be hydraulic, full rack and pinion type with a cast aluminum alloy shell. 
• Hydraulic fluid shall be non-gumming and non-freezing.
• Closer unit shall have two non-critical valves to independently regulate closing and latch speed.
• It shall also have an adjustable backcheck with a hex-key.
• Closer unit shall have spring power adjustment to permit a 50% increase in closing power over the minimum closing force for any size.
• Electromechanical Closer shall have (Infinite) (Selective) Hold Open (Free Swing Operation) and shall be able to attain a maximum opening of 180° (with hold open to 175°).
• Unit to be fail safe and must close the door during any electrical power interruption to the unit. 
• (Closer/Holder to be Executive Door Holder/Release with release actuated by battery operated hand-held controller).

Resources

• 7200 Electromechanical Closer
• 7200 Series Door Closer - Environmental Product Declaration (EPD)
• 7200 Series Electromechanical Closers Cut Sheet
• 7210, 7250 (Pull Side), 7220, 7230 (Push Side) Instruction Manual
• 7290MPI, 7290 MPS Overhead Concealed Closer/Holder
• 7290MPI, 7290MPS x 790 Fire Block Overhead Concealed Closer/Holder
• Master (MPDO), Slave/Support (MPSO) Units (7200 Series)
• Master (PTDO) or Support (PTO) Units, Push or Pull Side