Falcon Lock MEL-25C-L-BE-DAN-US26D-36X96-LHR Motorized Electric Latch Retraction CVR Exit Device w/ Dane Lever Trim 510L-BE

Falcon Lock MEL-25C-L-BE-DAN-US26D-36X96-LHR KIT offers an advanced motorized electric latch retraction (MEL) system, designed to enhance security while providing easy access in multifamily and commercial properties. This device features a concealed vertical rod exit mechanism, ensuring a clean aesthetic while meeting the highest performance standards. Constructed with a durable satin chrome finish (626/US26D), this Grade 1 exit device is specifically engineered for 36-inch by 96-inch left-hand reversible doors. The 24VDC, 1 Amp motor promotes energy efficiency and can be integrated with credential readers to facilitate controlled access for authorized users. The modular design simplifies installation, allowing for effortless upgrades to existing Falcon 24 or 25 series exit devices. With built-in diagnostics for troubleshooting and a self-calibrating motor assembly, the MEL-25C is not only reliable but also user-friendly. It supports both fail-safe and fail-secure electric trim options and requires a power transfer solution for proper installation. Vandal-resistant features enhance security against tampering, making it an excellent choice for high-traffic areas. Upgrade your security system with the Falcon Lock MEL-25C-L-BE-DAN, a perfect blend of functionality and style, tailored for modern building needs.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged