Falcon Lock MEL-25C-L-BE-DAN-US26D-36X96-RHR Motorized Electric Latch Retraction CVR Vertical Rod Exit Device, Satin Chrome

Falcon Lock MEL-25C-L-BE-DAN-US26D-36X96-RHR KIT features a motorized electric latch retraction (MEL) system, designed to provide efficient electronic control of exit doors. This system is an ideal solution for multifamily and commercial properties seeking a cost-effective means of managing access. The concealed vertical rod exit device operates with a blank escutcheon and Dane Lever Trim 510L-BE, making it suitable for doors sized 36 inches by 96 inches, with a right-hand reversible configuration. The 24VDC, 1 Amp operation meets Grade 1 standards, ensuring reliability in demanding environments. The modular design simplifies installation, allowing for an easy upgrade of existing Falcon 24 or 25 Series exit devices. Its energy-efficient motor supports longer wire runs, compatible with standard Schlage power supplies. Additionally, the MEL device incorporates self-calibrating technology and vandal-resistant features, which detect tampering attempts. For enhanced security, the device can be paired with credential readers, enabling authorized users to unlatch doors conveniently. The system also allows for extended periods of latch retraction, providing a flexible access control solution. With its satin chrome finish (626/US26D), the Falcon Lock MEL-25C is both functional and aesthetically pleasing, ensuring safety without compromising style.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged