Falcon Lock MEL-25C-L-DT-DAN-US26D-48X96-LHR Motorized Electric Latch Retraction CVR Exit Device with Dane Lever Dummy Trim

Falcon Lock MEL-25C-L-DT-DAN-US26D-48X96-LHR KIT features advanced motorized electric latch retraction (MEL), delivering an energy-efficient electronic control solution for exit devices. Designed particularly for multifamily and commercial real estate facilities, this system enhances security while maintaining affordability. With a 24VDC power requirement and a Grade 1 rating, it ensures reliable performance. This exit device is equipped with a concealed vertical rod exit mechanism and is paired with a Dane lever dummy trim, providing a sleek and modern aesthetic. The modular design simplifies installation, allowing seamless conversion of existing Falcon 24 or 25 Series exit devices to the MEL functionality. Built-in diagnostics facilitate easy troubleshooting, while the self-calibrating motor assembly ensures consistent operation. The MEL technology supports credential readers for authorized entry and can be integrated into systems for extended access, eliminating the need for mechanical dogging. It’s vandal-resistant, detecting and responding to tampering attempts. To maintain functionality, an electrified power transfer (EPT) is required, which is sold separately. With its satin chrome finish (626/US26D), this exit device not only meets security needs but also complements a variety of architectural styles, making it an ideal choice for any professional setting.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged