Falcon Lock MEL-25C-L-DT-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction CVR Exit Device w/ Quantum Lever Trim 510L-DT

Falcon Lock MEL-25C-L-DT-QUA-US26D-48X96-LHR KIT offers advanced motorized electric latch retraction, designed to enhance access control in multifamily and commercial properties. This high-performance CVR Concealed Vertical Rod Exit Device, paired with the Quantum Lever Dummy Trim 510L-DT, is built for efficiency and reliability. With a satin chrome finish (626/US26D), it seamlessly integrates into any architectural design while providing Grade 1 security assurance. The MEL features energy-efficient performance with a 24VDC, 1 Amp power requirement, allowing longer wire runs and compatibility with standard Schlage power supplies. Its modular design simplifies installation on existing Falcon 24 or 25 Series exit devices, ensuring mechanical egress at all times. The self-calibrating motor assembly and on-board diagnostics facilitate straightforward troubleshooting and maintenance. Designed with safety in mind, the MEL responds to tampering and attack attempts, making it ideal for high-traffic environments. This exit device can be used in conjunction with credential readers, allowing authorized users to access secured areas with ease. A power transfer device is required and sold separately, ensuring a reliable connection between the door and frame. Upgrade your security infrastructure with the Falcon Lock MEL-25C-L-DT-QUA, where durability meets innovative technology.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged