Falcon Lock MEL-F25C-L-DT-DAN-US26D-48X96-RHR Motorized Electric Latch Retraction CVR Exit Device with Dane Lever Dummy Trim

Falcon Lock MEL-F25C-L-DT-DAN-US26D-48X96-RHR KIT offers a state-of-the-art motorized electric latch retraction (MEL) system, designed to enhance security and convenience in multifamily and commercial facilities. This fire-rated CVR concealed vertical rod exit device combines functionality with a sleek satin chrome finish (626/US26D), ensuring it integrates seamlessly into your environment. The MEL system provides energy-efficient electronic control, allowing momentary unlatching for authorized users when paired with credential readers. It simplifies access by allowing extended periods of free entry, making it an excellent alternative to mechanical dogging. The device is UL listed and operates on a 24VDC, 1 Amp power supply, which can be easily managed with standard Schlage power supplies. This Grade 1 exit device features a vandal-resistant design that detects and responds to tampering attempts, ensuring robust security. Additionally, the self-calibrating motor assembly and onboard diagnostics streamline installation and troubleshooting. The modular design facilitates easy upgrades from existing Falcon 24 or 25 series exit devices. For optimal functionality, a power transfer (EPT, electrified hinge, or door loop) is required and sold separately, ensuring a reliable wiring path. With a door size accommodating 48 inches by 96 inches and a right-hand reversible configuration, this exit device is a versatile choice for enhancing safety and accessibility.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged