Falcon Lock MEL-F25C-L-DT-DAN-US26D-48X96-LHR Motorized Electric Latch Retraction Exit Device, CVR, Satin Chrome, 24VDC

Falcon Lock MEL-F25C-L-DT-DAN-US26D-48X96-LHR KIT is a cutting-edge motorized electric latch retraction (MEL) system designed for seamless access control in multifamily and commercial properties. This fire-rated CVR concealed vertical rod exit device combines robust security features with energy efficiency, making it an ideal solution for high-traffic areas. With a UL rating and compliant with Grade 1 standards, this exit device ensures reliable performance. The 24VDC motor operates quietly and efficiently, requiring only 1 Amp of inrush current, which allows for longer wire runs when paired with standard Schlage power supplies. Installation is simplified thanks to its modular design and self-calibrating motor assembly, ensuring a quick setup process. The MEL feature provides electronic control over the latch, allowing for momentary unlatching with credential readers or extended retraction for ease of access. Additionally, its vandal-resistant design detects and responds to tampering attempts, enhancing security further. This exit device is compatible with a variety of options, including security monitoring and fail-safe electric trims. Finished in a sleek satin chrome (626/US26D), the Falcon Lock MEL-F25C-L-DT-DAN is not only functional but also aesthetically pleasing, making it a perfect addition to any modern security application.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged