Falcon Lock RX-MEL-25C-NL-US26D-36X96 KIT - RX Motorized Exit Device, CVR Vertical Rod, Nightlatch Pull Trim, Satin Chrome

Falcon Lock RX-MEL-25C-NL-US26D-36X96 KIT offers an advanced solution for secure and efficient access control in multifamily and commercial buildings. This motorized electric latch retraction (MEL) system is designed to enhance the functionality of Falcon's 24 and 25 Series exit devices, making it an ideal choice for those seeking a cost-effective electromechanical option. This exit device features concealed vertical rods and a nightlatch pull trim, allowing for seamless integration with a mortise cylinder (sold separately). With a robust 24VDC operation at 1 Amp, it is classified as Grade 1, ensuring high durability and reliability. The satin chrome finish (626/US26D) not only adds a sleek aesthetic but also offers resistance to wear and tear. The MEL system supports efficient energy use, enabling longer wire runs and compatibility with standard Schlage power supplies. Its self-calibrating motor assembly simplifies installation and troubleshooting, while the vandal-resistant design ensures security against tampering. This device provides mechanical egress at all times, making it a safe option for high-traffic areas. For those looking to upgrade their security protocols, the Falcon Lock RX-MEL-25C-NL is a powerful tool that combines innovation with practicality, ensuring that access is granted precisely when needed.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged