Schlage ND72JDRHO626 Lock Cylindrical Lock

• Handing: All ND-Series lever locksets are non-handed.
• Door Thickness:
• 1-5/8" to 2-1/8" (41mm–54mm) standard including Vandlgard® functions.
• 1-3/4" - 2" for function ND85.
• Backset: 2-3/4" (70 mm) standard. 2-3/8", 3-3/4" and 5" (60 mm, 95 mm, 127 mm) optional.
• Faceplate: Brass, bronze or stainless steel. 1-1/8" x 2-1/4" (29 mm x 57mm) square corner, beveled.
• Lock Chassis: Zinc plated for corrosion resistance.
• Latch Bolt: Steel, 1/2" (12mm) throw, deadlocking on keyed and exterior functions.
• Exposed Trim: Levers: Pressure cast zinc, plated to match finish symbols.
• Roses: Brass, bronze or zinc.
• Strike: ANSI curved lip strike 1-1/4" x 4-7/8" x 1-3/16" lip to center standard. Optional strikes, lip lengths and ANSI strike box available.
• Cylinder & Keys: 6-pin Everest 29 S123 keyway standard with two patented nickel silver keys per lock.
• Keying Options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying.
• Communicating, Key in Either Lever Locks and Unlocks Own Lever
• ANSI/BHMA Certified A156.2-2011
• 1-5/8" to 2-1/8" Door Range
• Commercial Grade 1
• UL Listed for 3 Hour Fire Door
• No access with minimum 3,100 in-lbs of lever torque (2.6x BHMA, for general abuse)
• No access with minimum 1,600 lbs of offset lever pull (8x BHMA, for pry-bar attacks)
• No access with minimum 100 vertical impacts (20x BHMA, for sledgehammer attacks)
• Near-zero droop and wobble beyond 16 million cycles (after 16x BHMA) – without the use of set screws or O-rings
• Latch retraction with up to 200 pound preload (4x BHMA) for confident operation in warped and preloaded doors
• Cast steel spindle construction exceeding 16 million cycles
• Withstood aggressive Schlage development testing including lever-snap and abusive cycling
• 31 mechanical functions
• 6 wired functions with:
• Autodetecting 12-24V DC input
• Switch-selectable EL/EU operation
• Modular request to exit (RX)
• 0.230A max/0.010A holding current
• Available in 10 finishes, 5 lever designs, and 2 rose designs
• Multiple key systems available – open, patented, restricted, geographic exclusive, UL437
• Support for 10 non-Schlage cylinders including Best, Corbin Russwin, Medeco, Sargent and Yale
• Certifications: Exceeds BHMA A156.2 requirements for grade 1 cylindrical locks. Exceeds BHMA A156.25 requirements for indoor electrified locks.

Resources

• 2020 Schlage Multi-Family Price Book
• 2020 Schlage Price Book
• Cut Sheet
• Cut Sheet
• Everest 29 S Keyway Family Diagram
• Everest Keyways Diagram
• ND-Series Electrified Functions Installation Instructions
• ND-Series Electrified Functions Installation Instructions (solenoid, mfg before 3-14-2016)
• ND-Series Hollow Metal Door Spacer Installation Instructions
• ND170 Installation Instructions (locks manufactured after 8-15-2012)
• ND170 Installation Instructions (locks manufactured before 8-15-2012)
• ND25 Installation Instructions (locks manufactured after 8-15-2012)
• ND25 Installation Instructions (locks manufactured before 8-15-2012)
• Observe Keyways for Classic Conventional Cylinders Diagram
• Observe Keyways for Classic Primus XP Cylinders Diagram
• Schlage ND Series Catalog
• Schlage ND Series Electrified Cylindrical Locks Sell Sheet
• Schlage ND Series Sell Sheet
• Schlage ND Series Service Manual
• Schlage ND-Series Standard Installation Instructions (locks manufactured after 8-15-2012)
• Schlage ND-Series Standard Installation Instructions (locks manufactured before 8-15-2012)