Falcon Lock 25MELK-4FT-643E-CON Electric Latch Retraction Kit, Allegion Connect, 24VDC, 25 Series, Aged Bronze

Falcon Lock 25MELK-4FT-643E-CON Motorized Electric Latch Retraction Kit offers a reliable and energy-efficient electronic control solution for exit devices, making it ideal for multifamily and commercial real estate applications. Designed for compatibility with most Falcon 24 and 25 Series exit devices, this kit ensures mechanical egress while providing the convenience of motorized latch retraction. With a 24VDC power requirement and a low inrush current of just 1.0 amps, this kit seamlessly integrates with standard Schlage power supplies. Its modular design simplifies installation onto existing Falcon exit devices, while built-in diagnostics facilitate troubleshooting, ensuring minimal downtime. The self-calibrating motor assembly responds to attacks and tampering, making it a vandal-resistant option for high-traffic areas. The Falcon Lock 25MELK-4FT-643E-CON also supports integration with credential readers, allowing authorized users to unlatch doors effortlessly. For fire-rated applications, it complies with safety regulations by incorporating an automatic fire alarm system that drops power in emergencies. Available in an attractive aged bronze finish, this kit combines functionality with aesthetic appeal, making it a smart choice for enhancing security in any setting.

Motorized Electric Latch Retraction Kit with Allegion Connect, 24VDC 1A, 48in for 25 Series Except 25-M (Mortise), 643E/US11 Aged Bronze

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction. The MEL option is available on panic and fire rated devices. Because fire exit hardware must be self latching, an automatic fire alarm system must be incorporated to drop power to fire rated MEL devices in case of fire.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise).
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board.
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices.
• On-board installation and troubleshooting diagnostics built into the motor assembly.
• Self-calibrating motor assembly.
• Push bar is pulled in electronically when dogged.
• Vandal resistant – detects and responds to events of attack and tampering.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating. The MEL device is compatible with the following equipment: PS900 Series power supplies PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL.

Options:

• Security monitoring (DM, LM, RX).
• Fail Safe/Fail Secure electric trim (FSA/FSE).

Finishes:

• US3/605 - Brass, Bright
• US4/606 - Brass, Satin
• US10/612 - Bronze, Satin
• US11/643e - Bronze, Aged
• US15/619 - Nickel, Satin
• US19/622 - Black, Matte
• US26/625 - Chromium, Bright
• US26D/626 - Chromium, Satin
• US28/628 - Anodized, Aluminum
• US32/629 - Stainless Steel, Bright
• US32D/630 - Stainless Steel, Satin
• 313AN/710 - Anodized Duranodic