Von Duprin 9475EO 313 INPACT MTS 710 Exit Hardware

Von Duprin 9475EO 313 INPACT MTS EXIT 710 offers a robust solution for emergency egress with its impact-rated exit device designed specifically for factory prepped steel doors. This exit-only model features a sleek dark bronze anodized aluminum finish, ensuring both durability and aesthetic appeal. The 94/95 Inpact mortise lock device is UL listed for panic and fire safety, meeting ANSI/BHMA 156.3 Grade 1 standards, which guarantees superior performance and reliability in commercial settings. Its non-handed design allows for versatile installation, simplifying decision-making during setup. Key specifications include a latchbolt with a 5/8" throw, two-piece adjustable vertical rods suitable for doors ranging from 6'8" to 8'0", and a projection of 1 5/8" (41 mm) in its neutral position. The device is also equipped with fasteners for secure surface mounting and through bolting to trim, ensuring a sturdy installation. With a limited three-year warranty, this exit device combines functionality with peace of mind for building professionals and homeowners alike. The Von Duprin 9475EO is a reliable choice for ensuring safe exits in commercial environments, providing both security and compliance with safety regulations.

INPACT MTS EXIT 710

Inpacted Exit Device, Exit Only, No Trim, Dark Bronze Anodized Aluminum Finish

94/95 Inpact mortise lock device for use on factory prepped steel doors, not available for wood doors. The Inpact device is UL listed for panic and fire, ANSI/BHMA 156.3 Grade 1. The Inpact device is non-handed.

94/95 Inpact concealed vertical rod device for use on factory prepped steel doors, not available for wood doors.

The Inpact device is UL listed for panic and fire, ANSI/BHMA 156.3 Grade 1. The Inpact device is non-handed.

• Device functions Device ships EO, DT, TL, L Blank escutcheon (BE) available
• Device lengths 2'6" Up to 2'9" for 24 5/32" device 2'10" up to 4' for 30 5/32" device
• Device centerline from finished floor 39 5/8" (1006 mm)
• Projection 1 5 /8" (41 mm) neutral 1 1/4" (32 mm) depressed
• Latchbolt 5 /8" (16 mm) throw deadlocking latchbolt standard
• Door undercut 1 /4" (7 mm) maximum
• Top & bottom latch case assembly 4 1/2" X 2 1/8" x 1 1/2" (114 mm x 54 mm x 38 mm)
• Vertical rods Two-piece adjustable rods, door 6'8" (2032 mm) to 8'0" (2540 mm) can be adjusted by removing the latchside endcap
• Fasteners Included for surface mounting to recessed door prep and through bolting to trim

Resources

• 94/95 Inpacted Exit Devices Cut Sheet
• Introduction to Von Duprin Exit Devices
• Von Duprin 94/95 Series Catalog
• Von Duprin Finishes Chart