Von Duprin 9575EO-F US28 INPACT MTS Exit Device 628

Von Duprin 9575EO-F US28 INPACT MTS EXIT 628 is a robust exit device designed specifically for commercial environments. This exit-only device features a sleek satin aluminum finish (clear anodized) and is UL listed for both panic and fire safety, meeting ANSI/BHMA 156.3 Grade 1 standards. Engineered for use on factory prepped steel doors, it is not compatible with wood doors. The Inpact device is a concealed vertical rod model that boasts a non-handed design, allowing for versatile installation. It accommodates doors ranging from 6'8" to 8'0" in height, with adjustable two-piece rods ensuring a perfect fit. The latchbolt provides a 5/8" throw for secure deadlocking, and the device features a projection of 1 5/8" in its neutral position. With a centerline height of 39 5/8" from the finished floor, the Von Duprin 9575EO-F is easy to operate. Fasteners are included for surface mounting and through bolting, ensuring a straightforward installation process. Designed with safety in mind, this exit device is fire-rated for up to three hours and supports a maximum door undercut of 1/4". Experience reliable performance and peace of mind with the Von Duprin 9575EO-F exit device.

INPACT MTS EXIT 628

Inpacted Exit Device, Exit Only, No Trim, Satin Aluminum Clear Anodized

94/95 Inpact mortise lock fire exit device for use on factory prepped steel doors, not available for wood doors. The Inpact device is UL listed for panic and fire, ANSI/BHMA 156.3 Grade 1. The Inpact device is non-handed.

94/95 Inpact concealed vertical rod device for use on factory prepped steel doors, not available for wood doors.

The Inpact device is UL listed for panic and fire, ANSI/BHMA 156.3 Grade 1. The Inpact device is non-handed.

• Device functions Device ships EO, DT, TL, L Blank escutcheon (BE) available
• Device lengths 2'6" Up to 2'9" for 24 5/32" device 2'10" up to 4' for 30 5/32" device
• Device centerline from finished floor 39 5/8" (1006 mm)
• Projection 1 5 /8" (41 mm) neutral 1 1/4" (32 mm) depressed
• Latchbolt 5 /8" (16 mm) throw deadlocking latchbolt standard
• Door undercut 1 /4" (7 mm) maximum
• Top & bottom latch case assembly 4 1/2" X 2 1/8" x 1 1/2" (114 mm x 54 mm x 38 mm)
• Vertical rods Two-piece adjustable rods, door 6'8" (2032 mm) to 8'0" (2540 mm) can be adjusted by removing the latchside endcap
• Fasteners Included for surface mounting to recessed door prep and through bolting to trim

Resources

• 94/95 Inpacted Exit Devices Cut Sheet
• Introduction to Von Duprin Exit Devices
• Von Duprin 94/95 Series Catalog
• Von Duprin Finishes Chart