Von Duprin EPT10 695 CON Electric Power Transfer, 10x 24 Gauge Wires, 24VDC 1A, Dark Bronze 695

Von Duprin EPT10 695 CON Electric Power Transfer offers a reliable solution for transferring electrical power from door frames to swinging doors. Designed for heavy traffic and high-abuse environments, this unit features ten 24-gauge wires, providing up to 1 amp at 24VDC with a maximum surge capacity of 16 amps. The EPT10 is completely concealed when the door is closed, ensuring a clean look without compromising functionality. This device is UL listed for use on fire doors and certified as a miscellaneous door accessory, making it a versatile choice for various applications. The ball-and-socket joint construction provides essential protection against cuts and pinches, enhancing the durability of the wiring. It is compatible with up to 5" butt hinges for a 180° swing and accommodates multiple hinge and pivot configurations, ensuring flexibility in installation. The EPT10 comes in a sleek sprayed duranodic finish (SP313), adding an aesthetic touch to any entryway. With dimensions of 9" x 1-1/4" x 1-5/8", it is compact enough to fit seamlessly in your door hardware setup. Elevate your access control systems with the Von Duprin EPT10 695 CON, where reliability meets modern design.

Electric Power Transfer with 10 Each 24 Gauge Wires, 24VDC 1 Amp, 695/SP313 Powder-Coated Dark Bronze 695, Molex Connectors

Electric power transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideally suited for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires.

Features:

• UL listed for use on fire doors
• UL listed as miscellaneous door accessory
• Ball-and-socket joint construction provides cut and pinch protection for wiring
• Built for heavy traffic and high abuse openings
• EPT-2 and EPT-10 are UL634, ULC/ORD C634 and UL10C/CAN-ULC-S104 certified
• PNT-1 is UL10C/CAN-ULC-S104 certified

Door Applications:

• Up to 5" butt hinges – 180° swing.
• 5 1/2" butt hinges – 130° swing.
• 6" butt hinges – 110° swing.
• 3/4" offset pivots – 180° swing.
• Not for use with swing clear hinges, center-hung pivots, pocket pivots or balanced doors.
• Door applications shown are for 1-3/4" door thickness.

Dimensions:

• Housing: 9" X 1-1⁄4 X 1-5⁄8 (229mm X 32mm X 38mm)
• EPT-2: Two 18 gauge wires, up to 2 AMPS @ 24VDC, with a 16 AMPS maximum surge
• EPT-10: Ten 24 gauge wires, up to 1 AMPS @ 24VDC, with a 16 AMPS maximum surge
• PNT-1: 5/32" tubing

Finishes:

• SP28 - Sprayed aluminum
• SP313 - Sprayed duranodic