2GIG PS15EMZ-1 Z-Wave Plug-in Appliance Module

2GIG PS15EMZ-1 Z-Wave Plug-in Appliance Module seamlessly integrates smart technology into your home, offering enhanced control over your lighting. Designed to provide Z-Wave control to a connected dimmable lamp, this module plugs into any standard grounded AC wall outlet, allowing you to plug your lamp directly into it. With the capability to dim or turn the lamp on and off remotely via a Z-Wave controller, convenience and flexibility are at your fingertips. Equipped with two power receptacles-one controlled and one always powered-this module ensures that you can maintain functionality while enjoying smart features. The PS15EMZ-1 boasts an impressive range of up to 100 feet line of sight between the wireless controller and the nearest Z-Wave device, making it suitable for larger spaces. Its Auto-Sense feature allows local lamp activation independent of the Z-Wave controller status, enabling you to turn the lamp on simply by toggling its manual switch. With security beaming and network-wide inclusion capabilities, this module enhances your home automation experience. Rated for a maximum load of 300W for incandescent lamps at 120 VAC, the 2GIG PS15EMZ-1 Z-Wave Plug-in Appliance Module is a practical addition to any smart home setup.

Z-Wave Plug-in Appliance Module

The Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times). This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With Autosense, one can simply switch the connected lamp’s manual switch off, then on, and Autosense will instruct the PD300Z-2 to turn the lamp on.

Specifications:

• Signal (Frequency): 908.42 MHz
• Maximum Load:
• Incandescent: 300W maximum, 120 VAC
• Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
• Network wide inclusion
• One controlled and one pass-through outlet
• Security beaming
• Power Requirements
• 120 VAC, 60 Hz

Features

• Security beaming
• Power Requirements
• Maximum Load:
• Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
• 120 VAC, 60 Hz
• One controlled and one pass-through outlet
• Signal (Frequency): 908.42 MHz
• Network wide inclusion
• Incandescent: 300W maximum, 120 VAC