Command PD15-M-EU24V-CVR-48-628 RHR 24V Motorized Latch Retraction CVR Exit Device, 48in, RHR, 628/Alum

Command Access PD15-M-EU24V-CVR-48-628 RHR Motorized Latch Retraction is a top-tier exit device designed for storefront applications in commercial buildings and institutions. This 24V electrified concealed vertical rod (CVR) unit offers an impressive mix of functionality and ease of installation. Equipped with PTS "push to set" technology, it allows for quick adjustments without removing the door, making retrofitting a breeze, especially for Jackson 1285/95 and Kawneer 1686/1786 models. The PD15-M series stands out with its motorized latch retraction, providing fast, quiet, and smooth operation. It features the MM5 Smart Module that ensures on-board diagnostics with audible feedback, enhancing troubleshooting capabilities. The electric dogging function is designed for continuous duty, automatically re-engaging when pulled from the dogged position, while maintaining factory settings. With a low current draw, this device is compatible with most regulated 24VDC power supplies, allowing long wire runs up to 300 feet using 18-gauge wire. Its slim profile is ideal for narrow-style doors, offering versatility in various settings. Backed by a 3-year "no hassle" warranty, the PD15-M series combines reliability with exceptional performance, making it an essential addition to your security hardware lineup.

Motorized Latch Retraction, 24V (EU) Electrified Concealed Vertical Rod (CVR) Exit Device, 48in, RHR Right Hand Reverse, 628/Alum Aluminum Painted

The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS "push to set" technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle" warranty, meaning we will support you.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• "PTS": 1 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
• Up to 300’ with 2-18ga -- long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
• 8" cable with Quick connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging
• 3-year "no hassle" warranty - longer than the traditional 1 year warranty because our stuff works!
• Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices
• Motorized latch retraction w/ easy adjustment
• Long wire runs w/18ga - no need for specialty power supply right above the door.

Models:

• PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• PD15-M-CVR: Complete CVR device, specify handing - LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• Sub PD16: for mechanical devices

Specifications:

• System protection: unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak: 900mA, average current hold: 250mA
• PTS adjustment: approx. 1/4"
• 300’ Run w/ 18ga
• Handing: Rim device is non-handed. CVR device is handed.
• Door Thickness: Suits 1-3/4" standard
• Projection: 2-5/8" when fully projected, 1-5/8"when dogged.
• Stile Width: Minimum 2" stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws
• Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
• Push bar Length: Standard size: dimensioned for 36" and 48" openings. Standard width bars can be field cut to: 36/48" - 7" of filler plate needed

Accessories:

• Request to Exit (REX): Switch available factory installed
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field