Falcon Lock MEL-25C-L-BE-QUA-US26D-36X96-LHR Motorized Electric Latch Retraction CVR Exit Device w/ Quantum Lever Trim 510L-BE

Falcon Lock MEL-25C-L-BE-QUA-US26D-36X96-LHR KIT offers a sophisticated solution for secure access with its Motorized Electric Latch Retraction (MEL) system. This product is designed for commercial and multifamily properties, providing an energy-efficient electronic control for exit devices. The compact modular design allows for seamless installation on existing Falcon 24 or 25 Series exit devices, enhancing security without complicating the setup. Operating on a 24VDC power supply, the MEL system ensures mechanical egress at all times while allowing for momentary unlatching when paired with credential readers. This feature makes it an ideal choice for high-traffic areas that require both security and convenience. The system includes self-calibrating motor assembly and onboard diagnostics, which facilitate easy installation and troubleshooting. Constructed for durability, the device is vandal-resistant and actively responds to tampering attempts. Compatible with a variety of power supplies and capable of utilizing electrified hardware options, this exit device meets Grade 1 standards, ensuring its reliability in demanding environments. Finished in satin chrome, the Falcon Lock MEL-25C is not only functional but also aesthetically pleasing, making it a perfect addition to modern security systems.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged