Falcon Lock MEL-25C-L-BE-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction CVR Exit Device with Quantum Trim 510L-BE

Falcon Lock MEL-25C-L-BE-QUA-US26D-48X96-RHR KIT features a motorized electric latch retraction (MEL), providing a seamless and energy-efficient solution for managing access in multifamily and commercial environments. This exit device, designed with a concealed vertical rod mechanism, integrates effortlessly with credential readers, allowing authorized users to gain access while maintaining robust mechanical egress capabilities. Constructed to Grade 1 standards, the MEL-25C boasts a satin chrome finish (626/US26D) that combines durability with a modern aesthetic. Its energy-efficient 24VDC motor operates at 1 Amp, ensuring compatibility with standard Schlage power supplies for reliable performance. The device's modular design simplifies installation and retrofitting, making it an ideal choice for facilities looking to upgrade existing Falcon 24 or 25 Series exit devices. Notably, the MEL features on-board diagnostics for troubleshooting, a self-calibrating motor assembly, and vandal resistance to withstand tampering. Additionally, it is compatible with various power transfer options, enhancing its versatility in various applications. With a size suited for 48"x96" doors and right-hand reverse/reversible configuration, this exit device provides both security and convenience, ensuring your premises remain protected without compromising on accessibility.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged