Falcon Lock MEL-25C-L-DT-DAN-US26D-36X96-LHR Motorized Electric Latch Retraction CVR Exit Device with Dane Lever Dummy Trim

Falcon Lock MEL-25C-L-DT-DAN-US26D-36X96-LHR KIT offers an advanced solution for secure access control with its motorized electric latch retraction (MEL) system. Designed for multifamily and commercial facilities, this exit device combines energy efficiency with exceptional performance. The concealed vertical rod exit device features an elegant escutcheon paired with the Dane lever dummy trim, ensuring a sleek appearance while maintaining functionality. This model operates on a 24VDC, 1 Amp power supply, making it compatible with standard Schlage power supplies for easy integration. The modular design simplifies installation, allowing for the MEL conversion kit to be retrofitted to existing Falcon 24 or 25 Series exit devices. With built-in diagnostics and a self-calibrating motor assembly, troubleshooting is straightforward and hassle-free. The MEL-25C also boasts vandal-resistant features that detect tampering and provide mechanical egress at all times. Ideal for high-traffic areas, it can be paired with credential readers for authorized access or set to allow free entry for extended periods. The device is available in a durable satin chrome finish (626/US26D) and is designed to accommodate left-hand reverse (LHR) door configurations. Enhance your security with Falcon Lock's reliable and efficient MEL-25C system.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged