Falcon Lock MEL-25C-L-DT-QUA-US26D-36X96-RHR Motorized Electric Latch Retraction CVR Vertical Rod Exit Device with Trim 510L-DT

Falcon Lock MEL-25C-L-DT-QUA-US26D-36X96-RHR KIT offers an advanced motorized electric latch retraction (MEL) system, designed for efficient electronic control of exit devices. This model is particularly suited for multifamily and commercial real estate, providing a cost-effective solution for secure access. With a Grade 1 rating and a sleek satin chrome finish, it seamlessly combines durability with aesthetic appeal. The MEL feature allows for momentary unlatching with credential readers or extended access control, eliminating the need for mechanical dogging. Its modular design simplifies installation and is compatible with existing Falcon 24 or 25 Series exit devices. Built-in diagnostics and a self-calibrating motor assembly ensure reliability and ease of troubleshooting. This exit device operates on a low inrush current of 1.0 amp, making it compatible with standard Schlage power supplies. Additionally, the system is vandal-resistant, responding to tampering and attack attempts, enhancing overall security. The Falcon Lock MEL-25C is designed to fit doors sized 36" x 96" and is right-hand reversible, accommodating various architectural needs. Engineered for both functionality and security, this exit device is an ideal choice for professionals seeking a dependable solution for enhanced access control in high-traffic environments.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged