Falcon Lock MEL-25C-L-DT-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction CVR Vertical Rod Exit Device with Trim 510L-DT

Falcon Lock MEL-25C-L-DT-QUA-US26D-48X96-RHR KIT offers cutting-edge motorized electric latch retraction (MEL), designed for efficient electronic control of exit devices. This concealed vertical rod exit device is ideal for multifamily and commercial properties, providing a cost-effective solution without compromising on security. The sleek satin chrome finish (626/US26D) not only enhances aesthetics but also ensures durability. This exit device features a modular design that simplifies installation, allowing for easy upgrades to existing Falcon 24 or 25 Series exit devices. The energy-efficient 24VDC motor minimizes power consumption while supporting longer wire runs with a standard Schlage power supply. The self-calibrating motor assembly and on-board diagnostics facilitate straightforward installation and troubleshooting. Compatible with credential readers, the MEL system allows for momentary unlatching for authorized users, enhancing access control. The vandal-resistant design detects and responds to tampering, ensuring heightened security. For optimal performance, a power transfer solution, such as electrified hinges or door loops, is necessary and sold separately. With a Grade 1 rating, the Falcon Lock MEL-25C-L-DT-QUA-US26D-48X96-RHR KIT is a reliable choice for those seeking superior security and convenience in access management.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged