Falcon Lock MEL-25C-L-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction CVR Exit Device with Quantum Lever Trim 510L

Falcon Lock MEL-25C-L-QUA-US26D-48X96-LHR KIT offers robust security through its advanced motorized electric latch retraction (MEL) system. Designed for multifamily and commercial properties, this exit device combines energy efficiency with reliable performance. The MEL feature allows for electronic control of latching mechanisms, enabling authorized users to gain entry swiftly via credential readers or extended access periods. Constructed for durability, the device accommodates a variety of door sizes, specifically designed for 48-inch by 96-inch doors in a left-hand reversible configuration. With a Grade 1 rating, it ensures superior strength and longevity, making it a trustworthy choice for high-traffic areas. The satin chrome finish (626/US26D) not only enhances its aesthetic appeal but also provides protection against wear and tear. Installation is simplified thanks to its modular design and built-in diagnostics, allowing for quick troubleshooting. This device is vandal-resistant and features self-calibrating technology, ensuring reliable operation even in challenging conditions. It operates on a low inrush current of 1.0 amp, compatible with standard Schlage power supplies, making it an energy-efficient option for your security needs. Enhance your facility's safety with the Falcon Lock MEL-25C, an ideal solution for modern access control while maintaining mechanical egress capabilities.

KIT - Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged