Falcon Lock MEL-F25C-L-BE-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction Exit Device, CVR, Quantum Lever Trim 510L-BE

Falcon Lock MEL-F25C-L-BE-QUA-US26D-48X96-LHR KIT combines advanced security with user-friendly functionality. This motorized electric latch retraction (MEL) system is designed for both multifamily and commercial real estate, offering an energy-efficient solution for electronic access control. The fire-rated CVR concealed vertical rod exit device is complemented by a Quantum lever trim, and its left-hand reverse/reversible configuration ensures versatile installation options. With a robust 24VDC, 1 Amp power requirement, this Grade 1 device is built to withstand the demands of high-traffic environments. The MEL feature allows for seamless integration with credential readers, enabling momentary unlatching for authorized users or extended access periods, providing a convenient alternative to traditional mechanical dogging. The vandal-resistant design ensures reliability, detecting tampering and responding accordingly. Installation is simplified thanks to its modular design and built-in diagnostics for troubleshooting. Compatible with various power supplies, the MEL device requires a power transfer solution, which is sold separately. Available in a sleek satin chrome finish (626/US26D), this exit device not only enhances security but also adds a modern touch to any door system. Upgrade your access control with the Falcon Lock MEL-F25C for peace of mind and top-tier performance.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged