Falcon Lock MEL-F25C-L-BE-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction Exit Device, CVR, Quantum Lever Trim, Satin Chrome

Falcon Lock MEL-F25C-L-BE-QUA-US26D-48X96-RHR KIT is a state-of-the-art motorized electric latch retraction device designed for fire-rated applications. This concealed vertical rod exit device combines durability with advanced technology, making it ideal for multifamily and commercial properties. The MEL option enhances security while providing energy-efficient electronic control of the exit mechanism, allowing for seamless integration with credential readers for authorized access. Engineered for ease of installation, the modular design simplifies retrofitting existing Falcon 24 or 25 Series exit devices. With its self-calibrating motor assembly and built-in diagnostics, it ensures reliable performance and quick troubleshooting. The device operates at 24VDC with a low inrush current of 1.0 amp, making it compatible with standard Schlage power supplies. Designed with safety in mind, the Falcon Lock MEL-F25C features vandal-resistant technology that detects tampering attempts. It allows for mechanical egress at all times, ensuring building occupants can exit safely during emergencies. Available in a sleek satin chrome finish, this Grade 1 device not only meets stringent UL standards but also enhances the overall aesthetic of any entryway. For added functionality, pairing with an electric power transfer device is required.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged