Falcon Lock MEL-F25C-L-DT-QUA-US26D-36X96-LHR Motorized Electric Latch Retraction Exit Device, CVR Concealed, Satin Chrome

Falcon Lock MEL-F25C-L-DT-QUA-US26D-36X96-LHR KIT seamlessly integrates advanced security with user-friendly access control. Featuring motorized electric latch retraction (MEL), this fire-rated concealed vertical rod exit device is ideal for multifamily and commercial properties, providing a cost-effective solution for electronic door management. Its modular design allows for straightforward installation on existing Falcon 24 or 25 Series exit devices, enhancing efficiency without compromising safety. Certified for Grade 1 performance and built with a satin chrome finish, this exit device supports mechanical egress, ensuring that users can exit safely at all times. The self-calibrating motor assembly allows for smooth operation, while the built-in diagnostics simplify troubleshooting. Vandal-resistant features provide peace of mind, detecting attempts at tampering or forced entry. Operating on a 24VDC, 1 Amp power supply, the MEL device is compatible with various equipment, including PS900 Series power supplies. For added flexibility, it can be paired with credential readers, enabling secure access for authorized individuals. Additionally, a power transfer solution is required for proper installation. The Falcon Lock MEL-F25C-L-DT-QUA-US26D-36X96-LHR KIT represents an ideal choice for those seeking reliable, efficient, and secure exit solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged