Falcon Lock RX-MEL-25C-L-DAN-US26D-48X96-LHR KIT RX Motorized Electric Latch Exit Device, CVR Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25C-L-DAN-US26D-48X96-LHR KIT offers a cutting-edge solution for exit security with its motorized electric latch retraction (MEL) technology. Designed for multifamily and commercial properties, this device combines affordability with advanced electronic control, ensuring reliable and efficient access management. The concealed vertical rod exit device is paired with an elegant Dane lever trim, delivering both functionality and aesthetics. This exit device operates on a 24VDC power supply, requiring just 1 amp, making it energy efficient. The modular design simplifies installation, allowing for easy conversion from existing mechanical units. With built-in diagnostics for installation and troubleshooting, the RX-MEL is user-friendly, ensuring ease of maintenance. The device is vandal-resistant, detecting and responding to tampering attempts, while always providing mechanical egress. It’s compatible with credential readers for secure access, allowing authorized users to unlatch doors momentarily or keep them open for extended periods. Available in a sleek satin chrome finish (626/US26D), this exit device not only meets Grade 1 standards for durability but also enhances the overall security of your entry points. Choose Falcon Lock RX-MEL-25C for a sophisticated blend of security and convenience in your building’s access control system.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged