Falcon Lock RX-MEL-25C-L-DT-DAN-US26D-48X96-RHR KIT - Motorized Exit Device, CVR Concealed Rod, Satin Chrome, RHR, 24VDC

Falcon Lock RX-MEL-25C-L-DT-DAN-US26D-48X96-RHR KIT offers a robust solution for secure exit management in multifamily and commercial environments. This motorized electric latch retraction (MEL) system enhances efficiency with its energy-saving design, allowing for longer wire runs while maintaining reliable performance. The concealed vertical rod exit device, paired with the Dane Lever Dummy Trim 510L-DT, is perfect for various applications, accommodating door sizes up to 48 inches by 96 inches. This Grade 1 device operates on a 24VDC 1 Amp power supply, ensuring compatibility with standard Schlage power sources. Notable features include an energy-efficient motorized latch retraction that can seamlessly integrate with credential readers for quick access control. Its modular design simplifies installation, making it an ideal choice for retrofitting existing Falcon exit devices. The RX-MEL-25C is also built with security in mind, featuring vandal-resistant capabilities that detect tampering attempts. Self-calibrating motor assemblies and on-board diagnostics make installation and maintenance straightforward. With its satin chrome finish (626/US26D), this exit device not only delivers functionality but also adds a sleek look to your security setup. Enhance your building's safety with Falcon Lock's innovative exit device solution.

KIT - Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged