Falcon Lock RX-MEL-25C-L-DT-QUA-US26D-48X96-RHR RX Request to Exit Motorized Latch, Concealed Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25C-L-DT-QUA-US26D-48X96-RHR KIT is designed to enhance security and convenience in multifamily and commercial environments. This motorized electric latch retraction (MEL) exit device provides an efficient, energy-saving solution for controlled egress. The concealed vertical rod design allows for seamless integration with doors, ensuring a clean appearance while maintaining exceptional functionality. With a 24VDC operation and 1 Amp current, this grade 1 device is suitable for high-traffic areas, delivering reliable performance. The self-calibrating motor assembly and on-board installation diagnostics make setup and troubleshooting straightforward. The MEL option is particularly advantageous as it can work with credential readers, allowing authorized users to unlatch doors momentarily or keep them retracted for longer periods. Vandal-resistant features ensure that the device can withstand potential tampering or attacks, further enhancing security. The modular design allows for easy installation on existing Falcon 24 or 25 Series exit devices, making upgrades simple and efficient. Additionally, the RX-MEL-25C-L-DT-QUA is available in a sleek satin chrome finish (626/US26D), ensuring it complements any architectural style while providing top-notch security. This exit device is a smart investment for any building professional seeking reliable and effective access control solutions.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged