Falcon Lock RX-MEL-25C-L-QUA-US26D-36X96-LHR KIT - RX Motorized Electric Latch Exit Device, CVR Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25C-L-QUA-US26D-36X96-LHR KIT offers an advanced solution for secure, efficient access with its motorized electric latch retraction (MEL) feature. Designed for multifamily and commercial real estate, this concealed vertical rod exit device seamlessly integrates with credential readers, allowing authorized users to unlatch doors momentarily or for extended access. This exit device boasts a modular design for easy installation and can be retrofitted to existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly ensures reliable operation, while the energy-efficient 24VDC, 1 Amp system allows for longer wire runs with standard Schlage power supplies. The push bar is electronically dogged, enhancing convenience during high-traffic periods. Constructed to Grade 1 standards and finished in sleek satin chrome (626/US26D), this exit device not only meets aesthetic demands but also provides vandal resistance, detecting and responding to tampering attempts. It requires a 1-1/4 mortise cylinder and is compatible with various power transfer options and security monitoring systems. Elevate your security framework with the Falcon Lock RX-MEL-25C-L-QUA-US26D-36X96-LHR KIT, where durability meets advanced technology for optimal safety and accessibility.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged