Falcon Lock RX-MEL-25C-TP-US26D-36X96 RX Request to Exit Motorized Latch, CVR Vertical Rod, 24VDC, Satin Chrome

Falcon Lock RX-MEL-25C-TP-US26D-36X96 KIT is an advanced exit device engineered for seamless access control in multifamily and commercial spaces. Featuring motorized electric latch retraction (MEL), this device ensures efficient electronic control, providing a convenient alternative to mechanical dogging. The concealed vertical rod exit device is designed with a thumbpiece pull trim, allowing for easy operation. With a robust Grade 1 rating, the RX-MEL-25C-TP is built to withstand wear and tear while maintaining security. It operates on a 24VDC, 1 Amp power supply, making it compatible with standard Schlage power supplies. The modular design simplifies installation with the option to convert existing mechanical Falcon 24 or 25 Series exit devices. Its self-calibrating motor assembly and onboard diagnostics enhance reliability and ease of maintenance. The device is also vandal-resistant, detecting and responding to tampering attempts. It requires a 1-1/4 mortise cylinder for operation and supports various security monitoring options. Finished in stylish 626/US26D Satin Chrome, this exit device not only meets functional demands but also complements the aesthetics of any building. Ideal for high-traffic areas, the Falcon Lock RX-MEL-25C-TP is the perfect blend of security, convenience, and design.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Thumbpiece Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged