Falcon Lock RX-MEL-F25C-NL-US26D-36X96 RX Request to Exit Motorized Latch, Fire Rated CVR Vertical Rod Device, Satin Chrome

Falcon Lock RX-MEL-F25C-NL-US26D-36X96 KIT is a robust solution combining safety and modern design, featuring a motorized electric latch retraction (MEL) system. This fire-rated concealed vertical rod exit device is ideal for multifamily and commercial properties, providing an effective and aesthetically pleasing way to enhance security. With its two-point latching mechanism, the device ensures optimal protection while allowing for easy in-field adjustments via a patented center slide. Constructed from extruded aluminum, this exit device boasts impressive strength and impact resistance. The sleek design eliminates exposed screws or rivets, creating a streamlined appearance. The stainless steel push pad cover not only provides a scratch-resistant surface but also enhances durability. This model is compatible with a variety of trims, offering versatility for various applications. With features like vandal resistance, self-calibrating motor assembly, and energy-efficient operation, the RX-MEL-F25C is designed for longevity and reliability. It meets ANSI A156.3-2001 grade 1 standards, ensuring compliance with high-quality safety requirements. The device is also field reversible and can interface with building security systems, making it a smart choice for any security-conscious environment.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Fire Rated CVR Concealed Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), (Requires 1-1/4 Mortise Cylinder), 36in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

The F-25-C Series device lets you combine the safety of a fire-rated device with the clean aesthetics that come with a concealed vertical rod installation. In-field adjustment is simple thanks to our patented center slide mechanism. Two-point latching ensures optimal security at the door. Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• Extruded aluminum construction delivers greater strength and impact resistance.
• Includes panic exit and fire exit hardware for single and double door applications.
• No exposed screws or rivets on the back of the device for a streamlined design and clean lines for a more attractive installation.
• One trim input design provides maximum versatility and ability to use various trims.
• Stainless steel push pad cover provides a scratch-resistant pushing surface.
• Flush-end caps help prevent them from being destroyed or knocked off in abusive situations.
• Narrow stile center case is ideal for storefront applications with narrow stile aluminum doors.
• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Specifications:

• Hand: Field reversible.
• UL: "A" label (3 hr.); 4’ 0" x 10’ 0" single doors; 8’ 0" x 10’ 0" pair of doors (F-25-M x F-25-V or F-25-C).
• Strikes: 4188 mortised top, 2130 bottom standard.
• Latchbolt: Stainless steel, 3⁄4" throw.
• Deadlocking latchbolt: Standard.
• Stock sizes: See Chart Below.
• Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
• Projection: 2-3⁄4" maximum.
• Stile: 4" minimum.
• Mounting height: 40-1⁄4" from CL to finished floor.
• Electric functions: Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), FSA/FSE trim, security monitoring, delayed egress and exit alarm available.
• Fasteners: All mounting screws are concealed. All machine screws (AMS) standard.
• Sex bolts: Required when used with wood, composite or non-reinforced hollow metal doors. For EO device specify 6 - 425 (# 10-24) SNB. For devices with trim, specify 2 - 425 (# 10-24) SNB.
• ANSI: Certified ANSI A156.3-2001 grade 1 standards.
• 25-C-LBR: Less bottom rod, auxiliary fire pin required per pair.
• Vertical rods: Furnished to length based on 40-1⁄4" horizontal CL to finished floor and a 7’ 0" door. Variations from these standards must be specified when ordering.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• US3/605 - Brass, Bright
• US4/606 - Brass, Satin
• US10/612 - Bronze, Satin
• US11/643e - Bronze, Aged
• US15/619 - Nickel, Satin
• US19/622 - Black, Matte
• US26/625- Chromium, Bright
• US26D/626 - Chromium, Satin
• US28/628 - Anodized, Aluminum
• US32/629 - Stainless Steel, Bright
• US32D/630 - Stainless Steel, Satin
• 313AN/710 - Anodized Duranodic