Hafele 003.15.014 Titebond II Fluorescent Wood Glue

Hafele 003.15.014 Titebond II Fluorescent Wood Glue

Titebond II, Fluorescent Wood Glue

5 gallons

Same superior performance as Titebond® II Premium Wood GlueDetects unwanted glue residue when viewed under a black light Detects unwanted glue residue when viewed under a black light Resideual glue can be sanded off prior to applying stains Passes ANSI type II water-resistance Strong initial tack – Superior Strength Fast set & short clamp time Clean up with water - non toxic Excellent sandability
APPLICATION GUIDELINES Application temperature:Above 55°F Open assembly time: 5 minutes (70°F/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Assembly time after glue application: 0-5 minutes (70°F/50% RH) Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,750 72 150° Overnight 1,750 6 LIMITATIONS Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.52
• TCH_Furniture_Cabinetry_Hardware_ 2026 | Page 13.52
• Technical data sheet
• Titebond II Fluorescent Specifications