Hafele 003.15.124 Titebond White Wood Glue

Hafele 003.15.124 Titebond White Wood Glue

Hafele 003.15.124 Titebond, White Wood Glue is a versatile adhesive designed to meet the needs of both professionals and DIY enthusiasts. Offered in a convenient 1-gallon container, this fast-setting glue ensures a strong bond for a variety of woodworking applications. With a drying time of just 5 minutes for assembly at 70°F and 50% relative humidity, it allows for efficient project completion. Titebond White Glue stands out due to its non-toxic formula, free from solvent vapors, making it safe for indoor use. Cleanup is a breeze with water, allowing you to maintain a tidy workspace. This glue dries clear and colorless, ensuring a seamless finish on your projects. The recommended minimum spread of 7 mils, combined with appropriate clamping pressure-30-80 psi for high-pressure laminate and up to 250 psi for hardwoods-guarantees optimal results. While it excels in interior applications, Titebond White Glue is not suitable for exterior use or structural projects. For those scenarios, consider Titebond II or III alternatives. Always apply above 50°F, and if freezing occurs, agitation can restore its original consistency. Keep out of children's reach and refer to the MSDS for safe handling.

Titebond, White Wood Glue

1 gallon

Fast set - Strong bond Safe - no solvent vapors Water clean-up & non-toxic Versatile Dries clear and colorless Sets faster than most other white glues
APPLICATION GUIDELINES Application temperature:Above 50°F Assembly time after glue application: 5 minutes (70°F/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: 7 mils (typical) Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods and 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,550 50 150° Overnight 1,600 15 Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use.tact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING KEEP OUT OF THE REACH OF CHILDREN

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.53
• TCH_Furniture_Cabinetry_Hardware_ 2026 | Page 13.53