Hafele 003.55.000 Titebond Pro-Grade Plus Caulk

Hafele 003.55.000 Titebond Pro-Grade Plus Caulk

Hafele 003.55.000 Titebond, Pro-Grade Plus Caulk is an exceptional solution for both interior and exterior applications, delivering a reliable seal for joints, cracks, and gaps. This versatile caulk comes in a clean white finish, making it suitable for a variety of projects while ensuring a professional appearance. Designed for easy application, it can be painted with a water-based latex paint after just 2-4 hours, allowing for quick project completion. The Pro-Grade Plus formula provides a robust water-resistant seal, making it ideal for areas exposed to moisture, though it is not intended for continuous submersion. With a working time of approximately 10-15 minutes per 1/4" bead, it allows for efficient application, and the cleanup is a breeze, requiring only water for uncured material. Application is recommended when temperatures are above 40°F, and it’s essential that surfaces are clean and dry for optimal adhesion. The caulk covers a maximum length of 31 feet with a 1/4" bead from a 10.1 oz cartridge. For best results, store in a cool, dry environment and ensure proper joint design. Choose Hafele's Titebond Pro-Grade Plus Caulk for a durable and professional finish every time.

Titebond, Pro-Grade Plus Caulk

White

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet