Hafele 003.55.002 Titebond Pro-Grade Plus Caulk

Hafele 003.55.002 Titebond Pro-Grade Plus Caulk

Hafele 003.55.002 Titebond, Pro-Grade Plus Caulk is a versatile sealing solution designed for both interior and exterior applications. This brown caulk effectively seals joints, repairs cracks, and fills gaps, ensuring a durable and water-resistant finish. Its paintable formulation allows for application with water-based latex paint after curing, making it perfect for projects that require a seamless, polished look. With a working time of approximately 10-15 minutes for a 1/4" bead, this caulk is easy to apply. It covers a maximum length of approximately 31 feet when using a 1/4" bead from a 10.1 oz cartridge. Application is recommended at temperatures above 40°F, and it is essential that surfaces are clean, dry, and free from contaminants for optimal adhesion. The Pro-Grade Plus Caulk complies with rigorous standards, including ASTM C834 Type OP and ASTM C920 Type S, ensuring reliability in various conditions. While it provides a quick paint-ready surface in 2-4 hours for colored versions, the clear variant becomes paintable in 4-6 hours. Note that this caulk is not intended for continuous submersion and should not be applied if rain is expected within 12 hours. For best results, store in a dry location at or below 75°F.

Titebond, Pro-Grade Plus Caulk

Brown

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet