Hafele 003.55.007 Titebond Pro-Grade Plus Caulk

Hafele 003.55.007 Titebond Pro-Grade Plus Caulk

Hafele 003.55.007 Titebond, Pro-Grade Plus Caulk is the ideal solution for both interior and exterior applications, designed to effectively seal joints, repair cracks, and fill gaps. This antique white caulk provides a durable, water-resistant seal that adheres beautifully to various surfaces. Once applied, it can be painted with a water-based latex paint within 2 to 4 hours, ensuring a seamless finish. With an application temperature requirement of above 40°F, this caulk offers a working time of approximately 10 to 15 minutes for a 1/4" bead. Each 10.1 oz cartridge can cover up to 31 feet, making it a practical choice for larger projects. The cleanup process is straightforward-uncured material can be easily washed away with water, while cured excess must be cut or scraped away. This product complies with ASTM C834 and ASTM C920 standards, ensuring high performance and reliability. However, it is important to note that it is not suitable for continuous submersion or use below the waterline. For best results, store in a dry location at or below 75°F. Whether you’re a building professional or a knowledgeable homeowner, Hafele’s Pro-Grade Plus Caulk is a dependable choice for any sealing task.

Titebond, Pro-Grade Plus Caulk

Antique white

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet