Hafele 820.66.450 Switch, Diva, 2 Conductor Signal Wire (0-10V) is designed to enhance your lighting control with its efficient dimming capabilities. Finished in a light almond hue, this switch not only blends seamlessly into various indoor environments, including dining rooms, bedrooms, bathrooms, closets, and kitchens, but also promotes energy savings compared to standard wall switches. Compatible with the Loox Dimmer Interface Module and Loox Driver, it offers secondary side dimming, allowing you to adjust lighting to a precise 1% with smooth, continuous, and flicker-free performance. With an input voltage of 110 - 120 VAC and a capacity of 600 VA / 450 W, it operates effectively within a temperature range of 32°F (0°C) to 104°F (40°C) and is suitable for environments with humidity levels of 0% to 90% non-condensing. Installation is straightforward, as the switch arrives ready to use and comes with mounting screws, wire nuts, and detailed instructions. It is essential that a qualified electrician performs the installation in accordance with local and national electrical codes. Ensure compatibility with E-series and Lutron low voltage drivers, and only use copper conductors for optimal performance.
Switch, Diva, 2 Conductor Signal Wire (0-10V)
Light Almond
For installation by a qualified electrician in accordance with all local and national electrical codes. Use copper conductors only. For indoor use only. Check to see that the driver type and rating are suitable for the application. Compatible with E-series and Lutron low voltage drivers. DO NOT install if product has any visible damage. If moisture or condensation is evident, allow the product to dry completely before installation.
Area of application: Dining rooms, bedrooms, bathrooms, closets and kitchens For indoor use only
Color/finish: Almond
Height (inch): 2 3/16"
Length (inch): 4 1/2"
Material: Plastic, aluminum
Supplied with: Mounting screws Wire nuts Installation instructions
Width (inch): 2 1/4"
