Hafele 833.95.793 Extension lead for Hafele Loox5 24 V, 3-pin (multi-white) is designed to enhance your lighting setup with efficiency and reliability. This 300 mm (11 13/16") extension lead features a robust 20 AWG wire construction, ensuring a current carrying capacity of 3.5 A. With a four-conductor, stranded copper design, it meets Class 2 double insulation standards, providing safety and durability for your lighting applications. Ideal for use with Loox5 multi-white lights, this extension lead offers a maximum lead length of 10 m from the Loox5 driver to the device. It's important to note that longer cable runs with high loads can result in voltage drops, potentially affecting the brightness of your lights. The specified illuminance levels are based on the rated output voltage of 24 V from the driver. Compatible with various installations, the lead includes a plug and socket specifically designed for Loox5 3-pin MW connections. The extension lead is easy to install, requiring drill hole diameters of 9.00 mm for the plug and 13.00 mm for the socket. Its plastic construction ensures longevity, making it a reliable addition to your lighting solutions.
Extension lead, Hafele Lighting 24 V, 3-pin (multi-white)
3.5 A, 20 AWG, Length: (11 13/16") 300 mm
Lead length from Loox5 driver to device max. 10 m. Long cable lengths in combination with large loads (strip light lengths) can result in voltage drop in the cable. These lead to visible loss of brightness in the lights. The illuminance listed with the lights has been determined with the rated output voltage of the driver(24 V).
Area of application: For Loox5 multi-white lights
Cable length: 300.00 mm
Color system: MW
Connections: 1 x socket, Loox5 3-pin MW 24 V
Current carrying capacity: 3.50 A
Drill hole Ø: Plug 3/8"; socket 1/2"
Input ports: 1 x plug, Loox5 3-pin MW 24 V
Length (inch): 11 13/16"
Material: Plastic
Nominal voltage: 24.00 V
Number of leads: 3.00
Plug drill hole Ø: 9.00 mm
Socket drill hole Ø: 13.00 mm
Supplied with: 1 extension lead plug/socket
Version: Meets the following codes for wire and cable locations: > NEC article 411 Lighting systems operating at 30 V or less attached to Class 2 power > NEC article 725.135 Installation of Class 2 cable > NEC article 411.5 Specific Location Requirements
Wire cross section AWG: 20.00
