Hafele 833.95.795 Extension lead for Hafele Loox5 24 V, 3-pin (multi-white) is designed to enhance the functionality of your lighting systems. This robust extension lead features a length of 600 mm (23 5/8 inches) and is crafted from durable plastic, ensuring longevity and reliability in various applications. With a current carrying capacity of 3.5 A and a wire gauge of 20 AWG, this 4-conductor, stranded copper lead meets Class 2 double insulation standards, making it safe for use with Loox5 multi-white lights. The lead connects seamlessly from the Loox5 driver to your lighting devices, with a maximum effective length of 10 meters. However, it’s important to note that longer cable runs combined with large loads may result in voltage drops, potentially affecting brightness levels. Additionally, this extension lead complies with critical installation codes, ensuring it meets necessary safety standards. Each package includes one extension lead with a plug and socket, making installation straightforward. The Hafele 833.95.795 is an essential component for building professionals and knowledgeable homeowners looking to optimize their lighting setups with reliable, high-quality fittings.
Extension lead, Hafele Lighting 24 V, 3-pin (multi-white)
3.5 A, 20 AWG, Length: (23 5/8") 600 mm
Lead length from Loox5 driver to device max. 10 m. Long cable lengths in combination with large loads (strip light lengths) can result in voltage drop in the cable. These lead to visible loss of brightness in the lights. The illuminance listed with the lights has been determined with the rated output voltage of the driver(24 V).
Area of application: For Loox5 multi-white lights
Cable length: 600.00 mm
Color system: MW
Connections: 1 x socket, Loox5 3-pin MW 24 V
Current carrying capacity: 3.50 A
Drill hole Ø: Plug 3/8"; socket 1/2"
Input ports: 1 x plug, Loox5 3-pin MW 24 V
Length (inch): 23 5/8"
Material: Plastic
Nominal voltage: 24.00 V
Number of leads: 3.00
Plug drill hole Ø: 9.00 mm
Socket drill hole Ø: 13.00 mm
Supplied with: 1 extension lead plug/socket
Version: Meets the following codes for wire and cable locations: > NEC article 411 Lighting systems operating at 30 V or less attached to Class 2 power > NEC article 725.135 Installation of Class 2 cable > NEC article 411.5 Specific Location Requirements
Wire cross section AWG: 20.00
