Door terminal set with Thumbturn, Tag-itTM ISO
For interior doors, Matt
Notes on operation and installation Can only be used in combination with DT-Lite mortice lock. The mortice lock does not comply with the ANSI and DIN standards. Rotary knob on interior module: If it is rotated, the deadbolt in the mortice lock extends mechanically. From the inside the door can be opened without a key at any time. If the lever handle is operated, the latchbolt and the deadbolt (if extended) are retracted. From the outside with extended deadbolt - authorised guest card unlocks the door - service personnel card triggers a flashing signal "Do-Not-Disturb" - mechanical emergency opening with round cylinder possible Interior doors with fire resistance and smoke control requirements are only available as a door element and door terminal combination (planning required).
Area of application: for doors with standard requirements for guest room doors and interior doors
Functionality: battery-operated, intelligent door terminal, contactless activation using Dialock key - Red/blue LEDs for indication of locking and unlocking - After opening with a Dialock key, the door is locked again after 3 seconds in the standard setting. Alternate locking/unlocking can be set - If the rotary knob on the interior module is turned, the deadbolt in the mortice lock is mechanically extended. The door can be opened from the inside without a key at any time. If the lever handle is operated, the latchbolt and the deadbolt (if extended) are retracted. From the outside with the deadbolt extended - authorised guest card unlocks the door - service personnel card triggers a flashing signal "Do not disturb" - emergency opening with round cylinder possible - for service personnel: Indication of programming status and when battery change is required - with real-time clock and logging of all procedures - Infrared interface for programming
Options: Macros for extension of functions available on request, Mechanical emergency opening with round profile cylinder
Supplied with: 1 exterior module with processor 1 interior module 2 lever handle aperture parts 1 square spindle 8 mm 1 DND square spindle 1 cylinder cover
Transponder technology: Tag-it™-ISO ®
