Ives COR52 628 Door Coordinator 52in Channel Length UL, 628/US28 Satin Aluminum

Ives COR52 628 Door Coordinator 52in Channel Length UL, 628/US28 Satin Aluminum is an essential component for ensuring the reliable operation of pairs of doors. Designed specifically for situations where one door must close before the other, this door coordinator enhances security and functionality in any setting. The active door lever, situated nearest to the active stop, keeps the door open until the inactive leaf closes, triggering the mechanism. Constructed from high-quality 6000 Series aluminum, the COR52 is both durable and aesthetically pleasing, featuring a satin aluminum finish (628/US28). Its adjustable override functionality allows the active door to close under significant pressure, making it a robust choice for high-traffic areas. The coordinator is compatible with flush bolts and is designed to accommodate unequal door sizes, simplifying installation and ensuring a clean, professional look. For added flexibility, optional mounting brackets and filler bars are available, enabling customization to fit specific architectural needs. The COR52 meets ANSI/BHMA A156.3 Type 21A standards and is UL Listed for installation on labeled frames, ensuring compliance with safety regulations. With its blend of functionality, security, and style, the Ives COR52 is an ideal solution for professionals seeking to enhance door operations in residential or commercial environments.

Door Coordinator 52in Channel Length UL, 628/US28 Satin Aluminum

Ives offers various accessories to ensure a door is hung, protected and secured. Coordinators work with a flush bolt to secure a door and ensure a pair of doors close in proper order for latching to occur. With many bar coordinators, filler bars, mounting brackets, gravity coordinators and carry bars, Ives has coordinator needs covered.

Specifications:

• The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other
• All COR units function easily; The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.
• All COR units do not function correctly with swing clear hinges. (consult factory when used with 3⁄4" offset pivots)
• All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure
• All COR units are compatible with flush bolts
• For openings where doors are unequal size:
• The coordinator length should equal the active door width plus approximately 1⁄2 the inactive door width
• The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops
• The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines
• Material Substrate: Aluminum 6000 Series
• Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware
• Security pin screws
• Replacement mounting package
• Replacement rub plate package
• Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line
• Security pin screws
• Special prep cut-outs: Required for certain vertical exit device applications
• Certifications: Meets ANSI/BHMA A156.3 Type 21A. UL Listed for installation on labeled frame

Sizes:

Finishes:

• 628/US28 - Satin Aluminum, Anodized
• 711/315AN - Black Anodized
• 713 - Satin Chrome, Anodized

Features

• All COR units function easily; The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.
• Security pin screws
• The coordinator length should equal the active door width plus approximately 1⁄2 the inactive door width
• Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware
• The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines
• Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line
• The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops
• Special prep cut-outs: Required for certain vertical exit device applications
• Certifications: Meets ANSI/BHMA A156.3 Type 21A. UL Listed for installation on labeled frame
• All COR units do not function correctly with swing clear hinges. (consult factory when used with 3⁄4" offset pivots)
• All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure
• Replacement mounting package
• The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other
• All COR units are compatible with flush bolts
• Replacement rub plate package
• For openings where doors are unequal size:
• Material Substrate: Aluminum 6000 Series