Morris 91012 Dual Rated Aluminum Parallel Tee Tap Connector is designed for versatility, accommodating both copper and aluminum conductors. This connector is electro-tin plated, ensuring low contact resistance and corrosion protection, making it ideal for various applications in both residential and commercial settings. Constructed from high-strength 6061-T6 aluminum alloy, the 91012 guarantees maximum strength and excellent conductivity, essential for reliable electrical connections. With dual entry wire holes, this connector can function as either a parallel or tee tap connector, providing flexibility in installation. Installation is straightforward; assembly requires only a screwdriver or an Allen wrench, and the connector is re-usable, making it a cost-effective choice for contractors and DIY enthusiasts alike. The Morris 91012 is rated for 600 volts and can withstand temperatures up to 194°F (90°C), ensuring it meets the demands of various electrical applications. It is UL486B and CSA listed, affirming its compliance with industry standards. The connector accommodates main wires ranging from 2 to 12 AWG and tap wires from 4 to 14 AWG. Compactly sized at 1.39" in length, 0.63" in width, and 0.88" in height, the Morris 91012 is a reliable solution for your electrical connection needs.

Dual Rated Aluminum Parallel & Tee Tap Connector for both Copper and Aluminum.

• Dual entry wire holes allow for Parallel or Tee Tap connectors
• AL9CU Dual Rated
• Manufactured from high strength 6061-T6 Aluminum alloy to insure both maximum strength and conductivity
• UL486B/CSA Listed
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• Aluminum Parallel & Tee Tap connector is Dual Rated for both Copper and Aluminum conductors and Electro Tin plated to provide low contact resistance and protection against corrosion
• Dimension Measurements = Inches
• Parallel & Tee tap connector rated 600 volt 194°F(90°C)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet