Morris 96104 Anyone can use our Above Ground Connector

Morris 96104 Above Ground Connector offers an efficient solution for electrical connections without the hassle of traditional methods. Designed for quick installation in just minutes, this connector saves significant man-hours on the job site and eliminates the need for wire stripping, connecting, and taping split bolts. Its unique capability allows for installation on energized circuits, meaning power shutdowns are not required-a major advantage for overhead services and street lighting applications. This connector is suitable for insulated and bare mains, as well as for non-tension splicing and tapping. The double shear-head bolt design ensures correct torque tightening every time, preventing hot spots and ensuring a secure, corrosion-free connection that withstands hot, cold, damp, and salty conditions. The installation process is straightforward: simply insert the jacketed cable into the entry port and tighten with a 1/2" socket. Constructed from high-strength fiber-reinforced thermoplastic with galvanized steel bolts, the Morris 96104 provides a water-tight seal during installation to protect against oxygen and moisture. With a main range of 750 - 3/0 and a tap range of 10 - 14, this connector is versatile and reliable for various electrical projects.

Anyone can use our Above Ground Connector

• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Red Turbo spacer allows tap side to remain open while you hand tighten the above ground connector on the main wire (all models except 96102 & 96104)
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Blue Rubber Insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet