Morris 96114 Anyone can use our Above Ground Connector

Morris 96114 Above Ground Connector simplifies your electrical installations with its user-friendly design. This connector can be installed in just minutes, effectively saving valuable man-hours on the job. It eliminates the need for wire stripping, connecting, and taping of split bolts, allowing for a more streamlined process. Designed for use on energized circuits, the 96114 enables connections without requiring power shutdowns, making it ideal for overhead services, insulated and bare mains, street lighting, and more. Its double shear-head bolt ensures correct torque tightening every time, preventing hot spots, damaged wires, or loose connections. Installation is straightforward-simply insert the jacketed cable into the entry port and tighten with a 1/2" 6-point socket. The unique Red Turbo spacer allows for easy hand-tightening without disrupting the tap side. A Blue Rubber Insert recreates insulation when used on bare wire, protecting the neutral messenger from damage. Constructed from high-strength fiber-reinforced thermoplastic and galvanized steel bolts, the 96114 offers a corrosion-free connection suitable for various environmental conditions. Additionally, the connector's sealant tank compresses during installation, creating a watertight seal to protect against oxygen and moisture. With a torque rating of 160 inch-lbs and a tap range of 4/0 - 6, the Morris 96114 is a reliable choice for any electrical professional.

Anyone can use our Above Ground Connector

• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Red Turbo spacer allows tap side to remain open while you hand tighten the above ground connector on the main wire (all models except 96102 & 96104)
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Blue Rubber Insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet